E-Power Hobby ESC (Peak: 500A) – 120V with Heat Sink
1. Updated to the most recent firmware
2. Battery voltage from 16V to 110V
3. Two-way communication with PC
4. User upgradeable firmware
5. Motor wire can be check while Connecting the power battery
6. Parameter setting from PC
7. Li-MH/Li-Po, Ni-Cd/Ni-Mh, LiFe battery chemistries supported.
8. Enables setting the voltage per cell for the point at which the controller’s cut off circuitry engages.
N i-Cd/Ni-Mh .4-1.0V
9. Reverse direction. Adjustable reverse delay
10. Adjustable motor power
11. Automatic throttle detection, Automated shutdown if lost throttle connection
12. Adjustable Timing setting (0°-30°)
14. Peak 500A. Constant 300A with good heat dissipation and low voltage (24v to 50v)
15. Voltage must be under 100 volts.
|Dimensions||11 × 8.5 × 5.5 in|