Drone ESC

1.Once checking current is more than 180A and lasts 3 seconds, ESC will shut off power output, and will resume normal after making throttle zero. Short Circuit Protection Once checking instant current is more than 240A, ESC will power off, and will rework after trouble shooting and powering again. Stalling Protection Motor stall will trigger stalling protection. ESC will resume after making throttle zero and powering again. Voltage Protection Once checking voltage is less than 16V or more than 64V, ESC will alarm and will not start up motor. But it will be out of effect during flying. Temperature Protection When checking temperature is higher than 110 centigrade degree, ESC will output error signal. Once temperature exceeding 140 centigrade degree, ESC will shut off and will resume normal after making throttle zero. Throttle Loss Protection As checking throttle signal loss over 0.3 seconds, ESC will shut off and will rework after throttle signal recovery. Start Protection When motor is not started up after adding throttle for 10 seconds, ESC will shut off and will resume normal after making throttle zero. Throttle Stroke Setting First connect motor and adjust throttle top, then power on and ESC will beep two times. Second adjust throttle bottom and ESC will beep one time. After finishing these steps, throttle stroke will be set successful.