KK 2.1.5 LCD Multirotor Flight Control Board KK2.1.5 Newest V1.19S1 Quadcopter KK2 6050MPU 644PA and USBASP

$75.00

Dualcopter Tricopter Y6 Quadcopter + Quadcopter X Hexcopter + Hexcopter X Octocopter + Octocopter X X8 + X8 X H8 H6 V8 V6 Aero 1S Aileron Aero 2S Aileron Flying Wing Singlecopter 2M 2S Singlecopter 1M 4S (Custom Mix via the “Mixer Editor” option) The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.

2 in stock

Categories: ,

Description

Specifications:

Size: 50.5mm x 50.5mm x 12mm

Weight: 21 gram (Inc Piezo buzzer)

IC: Atmega644

PA Gyro/Acc: 6050MPU InvenSense Inc.

Auto-level: Yes

Input Voltage: 4.8-6.0V

AVR interface: standard 6 pin.

Signal from Receiver: 1520us (5 channels)

Signal to ESC: 1520us

Firmware Version: V1.19S1 PRO or OpenAeroVTOL

S1: Pre-installed firmware.

Dualcopter Tricopter Y6 Quadcopter + Quadcopter X Hexcopter + Hexcopter X Octocopter + Octocopter X X8 + X8 X H8 H6 V8 V6 Aero 1S Aileron Aero 2S Aileron Flying Wing Singlecopter 2M 2S Singlecopter 1M 4S (Custom Mix via the “Mixer Editor” option) The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.

  • Signal to esc: 1520us.
  • Signal from receiver: 1520us (5 channels).
  • Avr interface: standard 6 pin.
  • Input voltage: 4. 8-6. 0v.
  • Auto-level: yes.

Additional information

Weight 0.2 lbs
Dimensions 10 × 7 × 5 in

PDF Documentation

https://epowerhobby.com/wp-content/uploads/2022/12/KK2.1.5.pdf

https://epowerhobby.com/wp-content/uploads/2022/12/KK2.1.X-Instruction-Manual-V1.18S1-Pro.pdf

X