E-Power Hobby 150A 2-12S Car ESC HV Twin separate input signal
This ESC is a new version, twin (2 brain). It can drive two brushless motors. The 2 brushless motors can be programmed separately.
It has 10 capacitors, 63v, 330uf, 5.5mm connectors directly soldered on the PCB, battery spark suppression wire, Heat sink, powerful Mosfet, USB link to program it.
(Twin motor ESC for Car)
1.Design for car, more functions
2. Battery voltage from 12V to 50V for ( high voltage )version.
3.Two way communication while connecting it with computer.
4. Firmware can be upgraded by user.
5. Motor cable can be inspected while Connecting the power battery
6.Simply set function value by Prog-Box or by PC via USB link wire.
7.Li-MH/Li-Po,Ne-Cd/Ne-mH,LiFe battery can be use.
8.Enables setting the voltage per cell for the point at which the controller’s cut off circuitry engages.Li-MH/Li-Po from 2.0-3.6V,Ne-Cd/Ne-mH 0.4-1.0V,LiFe from2.2-2.8V
9.Reverse function. the delay time of reverse is adjustable
10. The power of the motor forward/ reverse can be set.
11.Automatically detection the throttle route or can be set a fixed number by manual operation. 12. Auto cut off the power within 3 seconds if no radio signs.
13.Timing setting may be adjusted (0°-30°) to suit the motor type.
|Dimensions||11 × 8.5 × 5.5 in|